產品名稱 Checkline TSD Torque Screwdriver,Checkline TSD扭矩螺絲刀
產品貨號
產品價格 現貨詢價，電話：010-67529703
產品規格
產品品牌 Abq Industrial
產品概述
產品詳情 Description
Price:
Checkline TSD Digital Torque Screwdriver
2 Ranges, Up to 35 lbf-in capacity
Units of measure: lb-in, kg-cm, cN-m

2 Models
TSD-50: Measuring Range: 0.45 - 4.50 lb-in / 5.0 - 50.0 cN-M (0.05 - 0.5 Nm)
TSD-400: Measuring Range: 3.50 - 35.00 lb-in / 40.0 - 400.0 cN-M (0.4 - 4 Nm)

Checkline TSD digital torque screwdrivers are designed for accurate measurement of application and removal torque of screws and fasteners. The TSD measures bi-directional torque in real-time or peak modes. 9 programmable target values can be preset to allow the operator to quickly fasten screws using audible and visual indicators to alert when the target value is reached or passed.

The TSD uses standard 1/4" hex bits allowing it to be used on a wide range of applications. An auto-locking bit holder allows for quick changing between sizes

line
Photo Gallery
line

ABQ ABQ ABQ ABQ

line
Features
line

  • Uses standard 1/4" bits
  • Clockwise & Counter Clockwise Torque Measurement
  • 9 Programmable Target Torque Setpoints
  • Real time & Peak Torque Measurement
  • Display Units: lb-in, cN-M and Kg-cm
  • 1 AAA battery provides 12 hours of continuous use
  • CE Certified

line
Force Ranges
line

ModelRangeResolution
TSD-500.45 - 4.50 lb-in
5.0 - 50.0 cN-M
0.50 - 5.00 kg-cm		0.01 lb-in
0.1 cN-M
0.01 kg-cm
TSD-4003.50 - 35.00 lb-in
40.0 - 400.0 cN-M
4.00 - 40.00 kg-cm		0.01 lb-in
0.1 cN-M
0.01 kg-cm


line
Quick Start Instructions
line

  1. Press C to power on screwdriver.
  2. Press U/S to select desired measuring unit.
  3. To select TRACK or PEAK mode press and hold the U/S key for 2 seconds, the display will show MODE, then press the up or down key to select between PEAK or TRACK mode (indicated by a small P or T in the bottom right corner of display). Then press the U/Skey three times to confirm your selection and return to measurement mode.
  4. Use up and down arrow keys to enter target torque. If you are simply measuring and do not have a target, adjust the setpoint to the highest value (maximum capacity of the screwdriver).

Note, when there is no torque applied the TSD will display the target value or previous reading (in Peak mode).

line
Specifications
line

AccuracyClockwise: ±2% Counterclockwise: ±3% (of indicated)
Guaranteed from 20-100% of capacity.
Presets9 Programmable setpoints with both audible beep and Green/Red LED indicator
Memory50 readings
Presets9 Programmable setpoints with both audible beep and Green/Red LED indicator
Drive1/4 Inch - 6.35 mm Hex
Operating ModesPeak / Track (real-time)
Power Supply1x AAA Battery (included)
Working Time12 hours continuous use
Auto OffAutomatic power off after 5 minutes of non-use
Operating Temp.-10°C - 60°C
Storage Temp.-20°C - 70°C
DimensionsLength (without bit): 200mm / 8in
Diameter at largest point: 29.5mm / 1.16in
Weight100%g
Warranty1 Year


line
Complete Kit
line

The TSD is supplied as a complete kit including the torque screw driver, Phillips size 0 bit (2.1in / 55mm length), instruction manual, factory calibration cert and 1 AAA battery in a hard plastic carrying case.

complete kit

line
Related Products
line

DID-4
Digital Torque Screwdriver
  • Peak, Real Time and Peak Down measuring mode (selectable)
  • Runs on internal NiCad batteries (8 hour use) Auto shut-off after 10 min. of non-use
  • USB data output for SPC capability
related

line

TT-QC
Torque Tool Tester - AWS-QC
  • Bidirectional accuracy of ± 1% of indicated reading
related

line

GLK
Digital Torque Screwdriver
  • Five programmable torque presets ideal for frequent operations
  • High accuracy ±1.5% F.S. both CW and CCW directions
related

line
Downloads
line

TSD Torque Screwdriver - Instruction Manual

line
Buy Now
line
產品資料