Cedar DI-12-SL Motorized Torque Screwdriver for Breakaway / Yield
產品貨號
產品價格
現貨詢價，電話：010-67529703
產品規格
產品品牌
Abq Industrial
產品概述
產品詳情
Description
Price:
Cedar Breakaway / Yield Motorized Torque Tester
Selectable units: lbf-in, kgf-cm, N-m. ozf-in units avaiable
Peak, Real Time and Breakaway/Yield measuring modes (selectable)
The Cedar DI-12-SL motorized torque tester is designed to find the actual yield tightening torque value for specific thread joints which consist of a variety of thread types, multi-layered material, hole sizes, etc.?
Torque controlled power tools are set to apply consistent torque, but fasteners are not necessarily tightened to that value if the tools are not calibrated. A breakaway test is used to verify the actual tightened torque of a bolt.
Breakaway torque tests require a skilled, experienced operator to sense when the bolt begins to breakaway. DI-12 automates this complex operation. Once breakaway torque is measured, power drivers can be reset to the proper tightening torque.?
DI-12 Automatic Breakaway Torque Tester drives the test piece at consistent speed and detects breakaway torque without overtorquing pretightened fasteners?
DI-12 outputs torque data continuously to data acquisition software via the USB virtual COM port, enabling the display of breakaway torque profiles
Photo Gallery
Features
Selectable units: lbf-in, kgf-cm, N-m. ozf-in units avaiable
Both CW and CCW operation
1/4" female hex
Peak, Real Time and Breakaway/Yield measuring modes (selectable)
USB virtual COM port sends peak (1 data) or continuous data (12 or 80 data/second)
Detects breakaway torque without overtorquing pretightened fasteners
Detects the yield torque of the screw joint
Displays real time torque values and captures peak torque
P-P:?Displays PEAK Torque value that will not change until a higher value is measured. T-R:?Displays TRANSIENT torque values. RG:?Determines peak down and yield torque (CW only)
If a peak down torque value is detected, the green indicator will light, and tester rotation will stop automatically.
Test Start Value
Start of RG Mode can be set in 0.001 N-m increments.
Output
USB (Virtual RS-232), continuous (9600 baud) output in PP and RG measuring modes.
Auto-power-off
After 5 minutes of non-use.
Dimensions
Detector: 44mm diameter x 190mm length, 1/4" hex drive
Indicator: 87mm W x 108mm D x 33mm H
